by Peter Tytherleigh | Aug 12, 2019 | Enclosures
We recently designed and manufactured a small run of 20 custom electronics casings for a specialist electronics engineering manufacturer in Surrey, UK. Outdoors Custom Electronics Casing The bespoke tracker casing was designed for both indoor and outside use and has a...
by Sharon | Jul 8, 2019 | Uncategorised
We are were delighted to introduce, Mark, our new Senior Electronics Design Engineer who joined the team here at CDT in Brackley last month. Mark Senior is responsible for all the Custom Assembly and PCB designs for both CDT and MDH. He is a highly experienced design...
by Ian Watson | Jul 1, 2019 | Prototype Plastic Enclosure
Here at CDT we had a lot of fun designing and manufacturing this response pad enclosure prototype which was made to look like a gaming controller. The prototype project comprised of two parts – a response pad enclosure and a bullring clip with pivot hinge and...
by Ian Watson | May 16, 2019 | Prototype Plastic Enclosure
CDT to the rescue… Last night we were delighted to be able to help a new client meet a deadline by delivering their plastic enclosure prototype within 3 days. Early on a Monday morning we got the call from a manufacturer in the security sector. They needed a...
by Ian Watson | May 13, 2019 | Plastic Enclosures
There are many different types of plastic available for enclosures. The plastic type and thickness you decide to use will depend on many factors including the design, manufacturing method, budget, and usage. There are a few aspects you may want to take into...
by Sharon | Apr 8, 2019 | News
We are delighted to introduce David Spillman (on the left), who has recently joined the CDT team and is heading up the Electronics Division. David is a highly experienced research and development electronics expert with extensive knowledge of production and assembly....
by Ian Watson | Mar 14, 2019 | News
The IK rating scale identifies the ability of an enclosure to resist impact energy levels measured in joules (J) i.e. how much mechanical impact an enclosure can resist. This scale is often used for electrical equipment like video cameras or luminaires. It’s an...
by Peter Tytherleigh | Feb 26, 2019 | Prototype Plastic Enclosure
We recently designed and built this flexible, lightweight N2U enclosure prototype for Electrical Motor specialists in the industrial sector. They needed a one-off branded enclosure quickly for a trade exhibition that they were attending the following month. We sprung...
by Sharon | Jan 29, 2019 | News
Time does fly when you are having fun. This month we are delighted to be celebrating our 33rd anniversary here at CDT in Brackley. We have certainly come a long way over the past three decades. We would like to take this opportunity to say thank you to all our...
by Peter Tytherleigh | Jan 28, 2019 | News, Plastic Enclosures
Another successful custom IP rated enclosure completed here at CDT. We’re delighted to have completed this full boxbuild project for a UK manufacturing management company EndtoEnd IT Ltd. This project involved the design, manufacture, assembly and printing of a...
